(** BEGIN PART TRANSFER **) G97 (ENTER RPM MODE) M34 (C-AXIS MODE OFF – LEFT SPINDLE) M134 (C-AXIS MODE OFF – RIGHT SPINDLE) M19 (ORIENT THE LEFT) M119 (ORIENT THE RIGHT) M131 (ALLOW THE RIGHT TO OPEN) M169 (OPEN RIGHT JAWS) G04 U1.0 (WAIT A SECOND) G54 G98 G00 A0.5 (RAPID TO 0.5 AWAY) M86 (TORQUE SKIP) G31 P99 A- 2.3 F 5 0.0 (FEED ONTO THE PART) (MODIFY A-AXIS VALUE PER PART/JAWS) M87 (TORQUE SKIP CANCEL) M168 (CLOSE RIGHT JAWS) G04 U1.0 (WAIT A SECOND) M31 (ALLOW THE LEFT TO OPEN) M69 (OPEN LEFT JAWS) G04 U1.0 (WAIT A SECOND) G00 G28 G53 A0.0 (GO HOME) M05 P21 (PREVENT ALARM) M05 P11 (PREVENT ALARM) (** END PART TRANSFER **) N70 M00 (** BLOW OUT LEFT SPINDLE JAWS **) (** LOAD STOCK FOR NEXT PART **) (** IN LEFT SPINDLE **) N71 M30 % - 24 -