4. Lift off the left and right cargo box panels; then remove the tailgate from the cargo bed. HDX111A 2. Raise the cargo box; then loosen the four retaining bolts securing the side panels in the stake pockets; then lower the box. HDX117 HDX115A 5. Remove the stake pocket retaining bolts, jam nuts, and forward tie bolt clip nuts and secure in a safe place with the machine screws and bush- ings from the tailgate. HDX112A HDX113A 3. Open the tailgate and remove the machine screws securing the stop- cables to the tailgate. Note the correct orientation of the bushings to the cable ends and tailgate. HDX116A To convert flat-bed to cargo box, use the following procedure. 1.
Set the tailgate into position in the cargo bed; then lift the cargo bed making sure the tailgate clears any receiver hitch attachments. HDX114A 26