Arctic Cat Prowler HDX — Arctic Cat Prowler HDX ROV Operator Manual PDF Download (EN)

Seat (HDX) 1. To remove the seat, lift up on the front of the seat; then slide it forward. 2. Push the latch-plate into the buckle slot until it “clicks” and latches securely. The belt will retract when the buckle is released. 2. To lock the seat into position, slide the rear of the seat into the seat retain- ers and push down firmly on the front of seat. The seat must engage the retainers and lock into position. ! WARNING Falling outside a moving vehicle could result in serious injury or death. Always fasten your seat belt securely and ensure the passenger seat belt is prop- erly and securely fastened prior to oper- ating or riding in this vehicle. !

WARNING Make sure the seat is secure before driving the vehicle. Serious injury or death could result if the seat is not properly secured. Occupant Side Restraints In addition to the seat belts, there are left- and right-side restraints to restrict arms or legs from extending outside the vehi- cle. The restraints should always be secured when the vehicle is moving. Seat Latches (Prowler) 1. To remove the seat, lift up on the latch release (located at the front of the seat); then raise the front of the seat and slide it forward. To secure the restraint, connect the restraint handle to the foot restraint latch bracket. To release the restraint, press the lever on the foot restraint. 2.

To lock the seat into position, slide the rear of the seat into the seat retain- ers and push down firmly on the front of seat. The seat should automatically lock into position. ! WARNING Make sure the seats are secure before driving the vehicle. Serious injury or death could result if the seats are not properly secured. Seat Belts This vehicle is equipped with seat belts for the operator and the passenger(s). To fasten and release the seat belt properly, use the following procedure. PR872A Cargo Box (HDX) The cargo box on this ROV can be con- verted to a “flat-bed” cargo platform. To convert your cargo box to a flat-bed, use the following procedure. 1.

Place the seat belt across your lap as low as possible without twisting the belt making sure the shoulder strap is below the neck and across the chest. 1. Remove all cargo from the box; then remove the left and right forward tie bolts. ! WARNING Only appropriate-sized passengers may ride in this vehicle. Passengers must be able to place both feet flat on the floor while keeping their back against the back of the seat and hold- ing on to the hand holds (outboard passenger only on HDX). 25