3. Elevate the vehicle. Muffler/Spark Arrester (HDX) The muffler has a spark arrester which must be periodically cleaned. At the intervals shown in the Maintenance Schedule, clean the spark arrester using the following procedure. 4. Remove the lug nuts. 5. Remove the wheel. 6. Install the wheel and install the lug nuts. 7. Install the wheel and tighten the wheel nuts in 20 ft-lb increments to a final torque of 40 ft-lb (steel wheel), 60 ft-lb (aluminium wheel w/black nuts), or 80 ft-lb (aluminum wheel w/ chrome nuts). ! WARNING Wait until the muffler cools to avoid burns. 8. Remove the jack. 1. Open the cargo box and remove the two springs securing the muffler to the exhaust pipe.
Muffler/Spark Arrester (Prowler) The muffler has a spark arrester which must be periodically cleaned. At the intervals shown in the Maintenance Schedule, clean the spark arrester using the following procedure. 2. Remove the muffler by pulling it rearward out of the vehicle. 3. Remove the three cap screws secur- ing the spark arrester assembly to the muffler. ! WARNING Wait until the muffler cools to avoid burns. 1. Remove the cap screws securing the spark arrester assembly to the muf- fler. HDX243A 4. Using a suitable brush, clean the car- bon deposits from the screen taking care not to damage the screen. PR879 2.
Using a suitable brush, clean the car- bon deposits from the screen taking care not to damage the screen. NOTE: If the screen or gasket is damaged in any way, it must be replaced. 3. Install the spark arrester assembly and secure with the cap screws. Tighten to 60 in.-lb. HDX242 NOTE: If the screen or gasket is damaged in any way, it must be replaced. 50