MAINTENANCE 24.6 EVERY 250 HOURS SERVICE Maintenance for every 50 and 100 hours should be carried out at the same time. 24.6.1 CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING Before changing the oil, wait, at least 10 minutes for the engine to cool down after running it. If the filter is removed before the oil settles the oil might continue to spill. Prepare the following. Oil catch container . . . . . . . . . Min 22 Filter wrench . . . . . . . . . . . . . . . . . . . . . . . . 09019-08035 Refill capacity . . . . . . . . . . . . . . . . . . . . . . . . .
19 For details of the oil to use and refill capacity, see 20 FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE on page 3-10. 1. Warm up the engine to operating temperature and then turn the engine OFF. 2. Open the engine hoods and lock in position. 3. Open oil filler (2) and remove drain plug (3) to drain oil. After draining, tighten the drain plug. 4. Clean the area around the oil filter. 5. Using a filter wrench, remove oil filter cartridge by turning it counterclockwise. 6. Clean the filter gasket surface of the filter. 3-48 WA320-3MC