MAINTENANCE 24.6.7 LUBRICATING WARNING Set the work equipment in a stable condition, then turn OFF the machine and apply the lock for the work equipment control levers. Apply the parking brake, and lock the front and rear frames with the safety bar and pin. Use a grease pump to pump in grease through the grease fittings marked by the arrows. After greasing, wipe off any old grease that was pushed out. 1. Bucket pin (2 places) 2. Bucket link pin (2 places) 3. Dump cylinder pin (2 places) 4. Lift cylinder pin (4 places) 5. Lift arm pivot pin (2 places) 6. Tilt lever pin (1 place) 7. Steering cylinder pin (4 places) 3-53 WA320-3MC