OPTIONS, ATTACHMENTS 30.2 RADIO 30.2.1 OPERATING CONTROLS 1. LIQUID CRYSTAL DISPLAY (LCD) PANEL This panel graphically represents all functions selected: radio frequencies, time and cassette functions. 2. ON-OFF POWER BUTTON This is the primary control for turning the system on and off. 3. AUDIO MODE SELECTOR BUTTON (MODE) This single button allows selection of volume, bass, treble, balance and fader control. 4 and 5. AUDIO LEVEL BUTTONS (+) (-) Press repeatedly to adjust the mode selected with the Audio Mode Selector Button (3). 6. RADIO BAND/TAPE PROGRAM BUTTON (BAND) In the radio mode, this control selects the broadcast band (FM1, FM2, AM, WB).
In the cassette mode, this button allows selec- tion of Side 1 or Side 2 of the cassette being played. 7 and 8. UP-DOWN TUNING/FAST-FORWARD REWIND ( DN)(UP ) In the radio mode, these buttons allow operator to search for radio frequency -- up down or automatic-seek. In the cassette mode, they select Fast-Forward or Rewind operation. 9. RADIO TIME/RADIO - TAPE SELECTOR (R/T) In the radio mode, this button allows operator to display either time or radio frequency. In the tape mode, it allows selection between radio and tape operation. 10. RADIO PRE-SET MEMORIES These five buttons allow the operator to store up to 20 radio stations (10 FM, five AM and five Weather Band) into pre-set memory. 11.
DOLBY ® NOISE REDUCTION ( ) In the tape mode, this button allows engaging the Dolby ® Noise reduction. In radio mode, this button is preset 1. 12. AUTO METAL TAPE SENSOR (MTL) The equipment senses automatically a cassette that requires Metal or CrO2 equalization and adjusts reproduction accord- ingly. When activated the symbol “MTL” appears on the display. NOTE: The control panel operates all radio and cassette functions except “eject”, which is actuated from the cassette player. The “remote” portion of the unit includes the controls only, and it will not operate outside of its cradle holder. 5-11 WA320-3MC