OPTIONS, ATTACHMENTS 30.2.2 OPERATION 1. LIQUID CRYSTAL DISPLAY (LCD) PANEL The Liquid Crystal Display Panel is the primary information display: radio frequency being received, time, audio settings and cassette operation (if used). NOTE: Like most LCD equipment, the radio’s display panel may be affected by extreme cold or exposure to very bright sun- light; numbers may be less visible and slow to appear. 2. ON-OFF POWER BUTTON Press this button to turn off the power for the radio and optional cassette player. Press again to turn on the power. 3.
AUDIO MODE SELECTOR BUTTON (MODE) To adjust an audio function, first select the audio function with this button (volume, bass, treble, balance or fader), and then adjust with the audio “+” and “-” buttons (4) and (5). The results will show up on the Liquid Crystal Display panel: volume (VOL), bass (BAS) treble (TRE) and fader (FAD). FAD operation wil be displayed only if four speakers are connected to the system. Volume To increase volume (louder) tap or hold the “+” button (4); to decrease the volume, tap or hold the “-” button (5).
The Liquid Crystal Display shows the progress with a bar graph to a maximum of 13 spots ( Bass To adjust bass level (low range), first select the Bass mode by pressing the Mode button (3) once so BAS is indicated on the display panel. Within five seconds, press the “+” or “-” audio button (4 or 5) to emphasize the low sounds. A triangle ( the display panel will indicate the level. The unit will retain the setting even when turned off. Treble To adjust treble level (high range), first select the Treble mode by pressing the Mode button (3) twice so TRE is indicated on the display panel. Within five seconds, press the “+” or “-” audio button (4 or 5) to emphasize the high sounds.
A triangle ( the display panel will indicate the level. Balance To adjust the audio balance, left-right, first select the Balance mode by pressing the Mode button (3) three times. BAL appears on the display panel, along with “L” (left) and “R” (right). Within five seconds, press the “+” audio button (4) to emphasize the volume of the right speaker(s) or the “-” button (5), to emphasize volume of the left speaker(s). The center illuminated arrow indicates mid-balance position. 4 and 5. AUDIO LEVEL BUTTONS (+) (-) Press repeatedly to adjust the mode selected with the Audio Mode Selector Button (3). WA320-3MC 5-12