11. EXPLANATION OF COMPONENTS 3. FM/AM SELECTOR BUTTON (AM/FM) Press this button and select the desired band. Each time the button is pressed, it switches AM FM AM ... 4. DISPLAY SELECTOR BUTTON (TIME) This equipment gives priority to the frequency display. If the button is pressed when the frequency is displayed, display will give the present time for 5 seconds. After 5 seconds pass, the display will automatically return to the frequency display. If any button other than TIME SET (H, M, SET) is pressed within the 5 seconds, the display will return to the frequency display. AM089980 AM089990 5. TUNING BUTTONS (TUNING) MANUAL TUNING (MANUAL) Use the buttons to change the frequency.
Up button ( . ): Each time the button is pressed, the frequency will go up in steps (FM: 0.1 MHz, AM: 9 kHz). Down button ( , ): Each time the button is pressed, the frequency will go down in steps (FM: 0.1 MHz, AM: 9 kHz). AM090000 6. PRESET BUTTONS (1, 2, 3, 4, 5, 6) (PRESET STATION) If these buttons are set to the frequency of the desired broadcast- ing station, the station can be selected at a touch. For details of the method of presetting, see “11.12.2 METHOD OF OPERATION”. AM090010 7. DISPLAY The reception band, frequency, preset number, and time are displayed. AM090020 8. TIME CORRECTION BUTTON This is used to correct the time. H : Hour M : Minute SET :
Sets to start of hour (00 minutes) AM090030 2-34