F2 07/26/2007 AXLE AND DIFFERENTIAL OPERATION DESCRIPTION OPERATION NUMBER NPR W3/W4 N/W CREW NQR W4/W5 NRR W5500HD FRR WT5500 FTR FVR FXR HTR HVR HXR PROPELLER SHAFT, REAR - REPLACE POLICY: K INC: D&C rear U-joint. Remove splined shaft from slip joint ADD: A - To Replace Pinion Shaft Companion Flange F1240 0.6 0.4 0.6 0.4 0.6 0.4 0.6 0.4 0.5 0.4 1.3 - PROPELLER SHAFT, INTERMEDIATE AXLE - REPLACE F1250 - - - - - 0.9 0.9 SHAFT,AXLE-REPLACE POLICY: K NOTE: In addition to replacing axle shafts, this operation is to be used when replacing axle shaft flange gaskets and/or seals DOES NOT INC:Additional operations which may be required to remove a broken axle shaft RIGHT LEFT ADD:
A - To Replace Wheel Bearings (Either Side) B - To Replace Broken Axle Flange Studs F1540 F1541 0.3 0.3 1.2 0.3 0.3 0.3 1.2 0.3 0.3 0.3 1.2 0.3 0.3 0.3 1.2 0.3 0.3 0.3 1.1 0.3 0.5 0.5 - - 0.5 0.5 - - SHAFT, AXLE - REAR TANDEM - RIGHT - REPLACE SHAFT, AXLE - REAR TANDEM - LEFT - REPLACE F1550 F1551 - - - - - - - - - - 1 1 1 1 SEAL, PINION SHAFT OIL - REPLACE POLICY: K INC: D&C U-joint. R&R pinion flange and pinion oil seal retainer DOES NOT INC: R&R differential carrier assy F2024 0.6 0.6 0.6 0.6 1 1.4 1 SEAL, PINION SHAFT OIL - REAR TANDEM - REPLACE F2025 - - - - - 1.2 1.2 CARRIER ASSEMBLY - R&R POLICY: K INC:
Drain and refill differential, D&C U-joint and R&R carrier assy to axle housing, replace gasket DOES NOT INC: Adjustment or replacement of any parts SINGLE SPEED - SINGLE AXLE ADD: A - To Mount Carrier In Work Stand B - To Adjust Side Bearings And Gear Lash SINGLE SPEED - SINGLE AXLE EATON - 23065S TWO SPEED - SINGLE AXLE EATON - E17221, E22221 SPICER-M220T C - To Replace Side Bearings INC: Add B. SINGLE SPEED - SINGLE AXLE EATON - 23065S TWO SPEED - SINGLE AXLE EATON - E17221,E22221 SPICER-M220T F2124 2.3 0.5 0.6 - - - 1.3 - . - - 2.3 0.5 0.6 - - - 1.3 - . - - 2.3 0.5 0.6 - - - 1.3 - - - 2 0.5 1.1 - - - 1.6 - - - 2 0.5 1.1 - - - 1.6 - - - 3.8 - - - - - - - - - 4.1 - - - - - - - - -