www.changlin.com.cn 15 mm Tighten the mounting nuts. Torque Value: 43N.m [32ft-lb] Disengage the engine timing pin. 114 / 149 pages 10 mm (PES6P Fuel Injection Pump) Tighten the capscrews for the rear support bracket. Torque Value: 24N-m [18ft-lb] 22 mm (PES. A Pump), 27 mm (PES. MW Pump), 30 mm (PES P Pump) Install the fuel injection pump retaining nut and washer. Initial Torque Value: 10-15N m [7-11ft-lb] NOTE: Do not exceed the torque value given. This is not the final torque value for the retaining nut. 10 mm (PES6P Fuel Injection Pump) Tighten the capscrews for the rear support bracket. Torque Value: 24N-m [18ft-lb] 22 mm (PES. A Pump), 27 mm (PES.
MW Pump), 30 mm (PES P Pump) Install the fuel injection pump retaining nut and washer. Initial Torque Value: 10-15N m [7-11ft-lb]