www.changlin.com.cn 118 to 131 mm Filter Wrench Clean the area around the lubricating oil filter head. Remove the filter. Clean the gasket surface of the filter head. NOTE: The o-ring can stick on the filter head. Make sure it is removed. Caution: Fill the filters with clean lubricating oil before installation. Apply a light film of lubricating oil to the gasket sealing surface before installing the filters. NOTE: The LF3000 lubricating oil filter has two gaskets. Lubricate both gaskets. Caution: Mechanical over-tightening may distort the threads or damage the lubricating oil filter element seal. Install the lubricating oil filter as specified by the filter manufacturer.
17mm Check and clean the lubricating oil drain plug threads and sealing surface. Install the lubricating oil pan drain plug. Torque Value: 80 N*m [60ft-lb] 43 / 149 pages