2.4. Operation Tip 2.4.1. Periodic Inspection cycle { : Check & adjust z :
Replace Technical Information - 51 - Inspection Daily Inspection time (hours) Remark 50 200 600 800 1,200 Cooling System Check for leakage (hoses, clamp) { Check the water level { Change the coolant water z Adjust the V-belt tension { Every 2,000 hrs Clean the radiator { Lubrication System Check for leakage { Check the oil level gauge { Change the lubricating oil z 1st { Replace the oil filter cartridge z 1st { Intake & Exhaust System Check the leakage for intercooler (hoses, clamp) { Clean and change the air cleaner element { clean z Clean the inter-cooler air fins { Clean the turbo-charger Every 2,000 hrs Fuel System Check the leakage fuel line { Clean the fuel strainer of fuel feed pump { Remove sediment from fuel tank { Drain the water in separator { Replace the fuel filter element z Check fuel Injection timing { When necessary Check the injection nozzles { When necessary Engine Adjust Check the state of exhaust gas { Check the battery charging { Check the compression pressure { When necessary Adjust Intake / Exhaust valve clearance { 1st When necessary