z Cam bearing diameter Measure the camshaft bush inside diameter with a cylinder gauge and by comparing the inside and outside Camshaft bearing diameters, replace if abnormal. EA0M4063 z Clearance between camshaft journal and body Remover, installer EA3M2039 z Camshaft bearing replacement Remover, installer. z Camshaft run-out With placing the camshaft on the 2ea of V-blocks, and inspect the run-out of the camshaft, adjust or replace the severe one. EA0M4066 Inspection - 71 - Standard Limit 70.077 ~ 70.061 mm 69.897 mm Standard Limit 0.060 ~ 0.120 mm 0.18 mm Standard 0.1 mm