CMD Commercial Application Marine Propulsion(B/C/N14) C8.3 Commercial Marine and Ind [...] Page W-16 Section W - Warranty CMD Commercial Application Marine Propulsion(B/C/N14) Coverage Engines Included in this Coverage Marine Propulsion 4B 6B 6C N14 Products Warranted This Warranty applies to new Cummins Engines sold by Cummins MerCruiser Diesel, herein after “CMD”, that are used in Marine propulsion applications anywhere in the world where CMD approved service is available*, and delivered to the first user on or after April 29, 2002.
The 'Product' consists of a new Cummins Engine, as well as accessories which are approved and supplied by CMD and which are either installed by CMD or a CMD authorized distributor. These Products have the following designation: MARINE PROPULSION - Intermittent Rating This power rating is intended for intermittent use in variable load applications where full power is limited to two hours out of every eight hours of operation. Also, reduced power operations must be at or below 200 RPM or the maximum rated RPM. This rating is an ISO3046 Fuel Stop Power Rating and is for applications that operate less than 1,500 hours per year.
MARINE PROPULSION - Medium Continuous Rating This power rating is intended for continuous use in variable load applications where full power is limited to six hours out of every twelve hours of operation. Also, reduced power operations must be at or below 200 RPM of the maximum rated RPM. This rating is an ISO3046 Fuel Stop Power Rating and is for applications that operate less than 3,000 hours per year.