C8.3 Commercial Marine and Ind [...] CMD Commercial Application Marine Propulsion(B/C/N14) Section W - Warranty Page W-17 MARINE PROPULSION - Heavy Duty Rating This power rating is intended for continuous use in variable load applications where full power is limited to eight hours out of every ten hours of operation. Also, reduced power must be at least 200 RPM below the maximum rated RPM. This rating is an ISO3046 Fuel Stop Power Rating and is for applications that operate less than 5,000 hours per year. MARINE PROPULSION - Continuous Rating This power rating is intended for continuous use in applications requiring uninterrupted service at full power.
This rating is an ISO3046 Standard Power Rating. Base Engine Warranty This Warranty covers any failures of the Product, under normal use and service, which result from a defect in CMD material or factory workmanship (Warrantable Failure). Coverage begins with the sale of the Engine by CMD and continues for the duration stated in the following table. The duration commences on either the date of delivery of the Product to the first user, or the date the unit is first leased, rented or loaned, or when the Product has been operated for 50 hours, whichever occurs first. Extended Major Components Warranty The Extended Major Components Warranty applies to Engines other than B and C Series.
It covers Warrantable Failures of the Engine cylinder block, camshaft, crankshaft and connecting rods (Covered Parts). Bushing and bearing failures are not covered. This Coverage begins with the expiration of the Base Engine Warranty and ends after three Duration Whichever Occurs First Rating Years Hours Intermittent 1 1,500 Medium Continuous 1 3,000 Heavy Duty 1 5,000 Continuous 1 Unlimited