23 3. Pull the lock lever all the way back. (lock position). 4. Insert the key into the starter switch and turn it to the "RUN" position, and the glow lamp indicator will light up while the engine is preheated, and will go out automatically after preheating is fi nished. Display Selector Switch Press the display selector switch, and the electronic meter’s LCD display will change from one indication mode to the other. Change the two-mode display according to your jobs. (1) Display selector switch (2) LCD display (1) Starter Switch (A) “STOP” (B) “RUN” (C) “START” 5. Turn the key to “START” position and release after the engine has started; it will automatically return to the “RUN” position. 6.
Check if all warning lamps have gone out. Should a warning lamp still be lit up, stop the engine then remove the key and check for the cause. (1) Fuel gauge (A) ”INDICATION MODE 1” (2) Water temperature gauge (3) Oil lamp (4) Hour meter (5) Charge lamp (6) Glow lamp NOTE: With the starter key at the ”STOP” position, press the electronic meter’s display selector switch or the working light switch, and the LCD display shows the hour meter, fuel gauge and water temperature gauge for 10 seconds.