OM7004 4/05 Radio / Cassette Player - Section 70 Page 70-1 RADIO / CASSETTE PLAYER FIGURE 70-1. RADIO / CASSETTE PLAYER GENERAL RECEIVER FUNCTIONS Setting The Default Display 1. Press and hold DSPL/TM (9) for two seconds until the hour digits flash. Turning The Power On And Off 1. Turn the key switch to ON. 2. Press PWR (1, Figure 70-1) to turn the receiver on and off. Pushing ON/AUDIO (6) also turns the receiver power on. 2. Press push-button 6/FF (15) to change the default display. After five seconds of inactivity has elapsed, the selected default will display. Display With the receiver off, the clock will be displayed.
Momentarily pressing DSP/TM SET (9) with the receiver on will allow the operator to toggle between displays. Adjusting Display Brightness 1. Press and hold DIM (14) until DIM appears on the display. When the receiver is in AM, FM1, FM2, or WX, the display will toggle between the frequency and the clock. 2. Rotate ON/AUDIO knob (6) clockwise or coun- terclockwise until the desired brightness is obtained. When the receiver is in an active satellite mode and the provider is transmitting the available information, the display will toggle between the clock, frequency, station name, artist, song title and music type.
When the receiver is in the cassette mode, the display will toggle between TP SIDE 1 or TP SIDE 2, and the clock.