DBC 130(F30i Series) DBC130ALE2A 1.6 2006 Spindle Gear Shift Check Switch Alarm 1) Description 3 or more of 4 check switches (Low, Middle, High, etc) on the spindle head gear range were tripped, or none of them was tripped. 2) Cause of problem The check switch for the main spindle gear range has short-circuited or any of its component parts is defective. 3) Action Check the gear box switch of the main spindle if it works properly on the DGN screen, and take a necessary measure.
Note 1) Spindle Gear Shifting I/O Settings Note 2) Spindle Gear Range Shifting RPM (D460~D462) Data of the data table---0002/0011(gear shift rpm) 14 Device Connector Signal Address I/O Numbering Symbol (Pin) Gear 1 Check X3.0 (SGA.M) -SL11 Input Module Slot 06 XJ412 (12) SL11 Gear 2 Check X3.2 (SGB.M) -SL13 Input Module Slot 06 XJ412 (44) SL13 Gear 3 Check X3.3 (SGC.M) -SL14 Input Module Slot 06 XJ412 (11) SL14 Gear 4 Check X3.4 (SGD.M) -SL15 Input Module Slot 06 XJ412 (27) SL15 Spindle Gear 1 Y4.0 (GR1.V) -KAR40 Output Module Slot 3 XJ400 (16) YV14 Spindle Gear 2 Y4.1 (GR2.V) -KAR41 Output Module Slot 3 XJ400 (32) YV15 Spindle Gear 3 Y4.2 (GR3.V) -KAR42 Output Module Slot 3 XJ400 (48) YV18 Spindle Gear 4 Y4.3 (GR4.V) -KAR43 Output Module Slot 3 XJ400 (15) YV19 ADDRESS NO.
DATA MEANING D0460 # 0000 25 Gear shift rpm in gear1 range D0461 # 0001 25 Gear shift rpm in gear2 range D0462 # 0002 25 Gear shift rpm in gear3 range