Before using for the first time en Before using for the first time Before using for the first time 2. Set the required length of the tele- scopic tube. → Fig. 8 Prepare the appliance for use. Switching on the appliance Installing the appliance 1. Hold the mains plug and pull it out to the required length. 2. Insert the mains plug into the 1. Place the handle onto the the hose and lock it in place. → Fig. 3 2. Engage the hose adapter into the socket. 3. Press . → Fig. 9 air-intake opening in the lid. → Fig. 4 3. Connect the handle to the tele- Switching off the appliance 1. Press . 2. Unplug the mains plug. 3. Briefly pull on the mains cable and scopic tube. 4.
Connect the telescopic tube to the floor nozzle. → Fig. 5 5. Place the accessory support 1 onto then let go. a The power cord retracts automatic- the telescopic tube. → Fig. 6 6. Place the crevice nozzle 1 from the ally. Transporting the appliance bottom onto the accessory support 1 . → Fig. 6 7. Place the brush ring 1 onto the up- 1. Switch off the appliance. 2. Stand the appliance upright on its end. 3. Slide the catch on the floor tool holstery nozzle 1 . → Fig. 7 8. Place the upholstery nozzle 1 with into the groove on the underside of the vacuum cleaner. → Fig. 10 4. To overcome obstacles, transport the brush ring 1 from above onto the accessory holder 1 . → Fig.
6 the appliance by the handle. Basic operation Basic operation Controlling the power 1 You can control the setting continu- ously. You can find out everything you need to know about operating your appli- ance here. 1. Turn the power control to the re- quired setting. → "Overview of the controls", Page 14 2. Turn the telescopic tube with air Setting the telescopic tube 1. Unlock the telescopic tube. flow regulator to the required posi- tion. → Fig. 11 1 Depending on the appliance specifications 15