en Cleaning and servicing Setting the floor tool Cleaning and servicing Cleaning and servicing ▶ Use the switch to set the floor nozzle to the required base. → Fig. 12 To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. Overview of the floor nozzle settings Motor protection Here, you can find an overview of the floor nozzle settings. Pay attention to dirt in the motor. ATTENTION! Dirt in the motor may damage the motor. ▶ Never operate the appliance Symbol Use Vacuum rugs and carpets. Vaccum parquet and hard floors. without a dust bag. ▶ Never operate the appliance Vacuuming with accessory without the motor protection filter.
▶ Never operate the appliance 1. Place the required nozzle onto the without the exhaust filter. telescopic tube or the handle. 2. After use, take the nozzle that is Cleaning products used from the telescopic tube or remove from the handle. Only use suitable cleaning products. Stopping and parking the ap- pliance ATTENTION! Using unsuitable cleaning products or incorrect cleaning may damage the appliance. ▶ Do not use harsh or abrasive de- 1. Switch off the appliance. 2. If you want to stop vacuuming for longer use periods, use the stor- age aid on the underside of the appliance. → Fig. 10 3. Use the parking aid for shorter tergents. ▶ Do not use cleaning products with a high alcohol content.
▶ Do not use hard scouring pads or cleaning sponges. ▶ Wash sponge cloths thoroughly programme pauses. → Fig. 13 before use. Dismantling the appliance Cleaning the motor protection filter 1. Disconnect the connection Tip: To achieve the best possible va- cuuming results, tap out or wash the motor protection filter at regular inter- vals. After vacuuming fine dust particles, clean or replace the motor protection filter in order to guarantee the appliance's suction. between the telescopic tube and the handle. → Fig. 14 2. Push the two locking catches to- gether. 3. Pull the tube out of the appliance. → Fig. 15 1. Switch off the appliance. 16