en Installation and connection 3. Prepare the appliance for first use. → Page 12 4. Electrically connect the appliance. The appliance is fully functional within the permitted room temperature. If an appliance with climate class SN is operated at colder room temperat- ures, the appliance will not be dam- aged up to a room temperature of 5 °C. → Page 12 Criteria for the installation loca- tion Follow these instructions when in- stalling your appliance. Niche dimensions Observe the niche dimensions if you install your appliance in the furniture recess. If this is not the case, prob- lems may occur when installing the appliance.
Niche depth Install the appliance in the recom- mended niche depth of 560 mm. If the niche depth is smaller, the en- ergy consumption increases slightly. The niche depth must be a minimum 550 mm. Niche width An inside niche width of at least 560 mm is required for the appli- ance. WARNING Risk of explosion! If the appliance is in a space that is too small, a leak in the refrigeration circuit may result in a flammable mix- ture of gas and air. ▶ Only install the appliance in a space with a volume of at least 1 m 3 per 8 g refrigerant. The volume of refrigerant is indicated on the rating plate. → "Appliance", Fig.
1 / 3 , Page 15 The weight of the appliance ex works may be up to 70 kg depending on the model. The subfloor must be of sufficient sta- bility to bear the weight of the appli- ance. Preparing the appliance for the first time 1. Remove the informative material. 2. Remove the protective foil and Permitted room temperature The permitted room temperature de- pends on the appliance's climate class. The climate class can be found on the rating plate. → "Appliance", Fig. transit bolts, e.g. remove the ad- hesive strips and carton. 3. Clean the appliance for the first time.
→ Page 22 1 / 3 , Page 15 Connecting the appliance to the electricity supply Climate class Permitted room temperat- ure SN 10 °C to 32 °C N 16 °C to 32 °C ST 16 °C to 38 °C T 16 °C to 43 °C 1. Insert the mains plug of the appli- ance's power cable in a socket nearby. The connection data of the appli- ance can be found on the rating plate. → "Appliance", Fig. 1 / 3 , Page 15 12