Final inspection and function check Handover • Clutch • Check gear shift action. • Steering • Handbrake and footbrake • Check lights and signalling equipment: – Front and rear parking lights – Instrument lighting – Low and high headlight beams, headlight flasher – Brake light (operate brake at front and rear) – Turn signals left/right – Horn – Telltale and warning lights – Instruments • Where necessary, check function of optional ex- tras: • ABS: perform starting test. The ABS warning light comes on if there is a fault in the system and the vehicle is ridden for at least 10 seconds at a speed in excess of 30 km/h (18.64 miles). • If necessary, take the motorcycle for a test ride.
• Confirm pre-delivery check in “Maintenance In- structions” • See “Checking motorcycle for damage” if any- thing is unsatisfactory. This is the ideal opportunity to familiarise the cus- tomer with the motorcycle in order to ensure the customer’s satisfaction and safety. • The following points must be demonstrated and explained to the customer: – Documentation and stowage space – Toolkit and stowage space – Suspension preload adjustment to suit total weight – How to check the brake fluid – How to adjust the mirrors – Controls – instruments and telltale lights – Optional equipment and accessories fitted • The user must be given the following information:
– Running-in recommendations and inspection in- tervals – Safety check – How to check the oil level in accordance with the vehicle documentation 00 11 459 Final cleaning • Clean the motorcycle. L Note: Do not use a steam or high-pressure water jet. The high steam or water pressure could damage seals, the hydraulic system or electrical components. BMW recommends Castrol 00.23