e Attention: Do not use synthetic oils. 00 11 215 Changing the engine oil [en- gine and oil tank] and oil filter ele- ment Operating fluids: Brand-name HD oil, API classification SF, SG or SH; suffix letters CD or CE are permitted; alternatively, brand-name HD oil of CCMC classification G4 or G5; suffix PD2 is permitted. (Inspections II, III and IV) L Note: If an engine failure occurs, the oil tank and feed line must be flushed with thin oil, and then blown through with compressed air ( a 11.17). Capacity, engine: with filter replacement ......................................0.5 l .............................(0.88 Imp. pints/0.53 US quarts) 00 11 215 Preparatory work X Tightening torque:
Oil drain plug, engine ................................... 40 Nm – Place motorcycle on side stand. – Remove cover for belt sprocket from engine. 00 11 215 Draining engine oil d Warning: Observe the hazard avoidance instructions for run- ning internal combustion engines in enclosed spac- es. • Warm up the engine to operating temperature. • Place a suitable container in position to catch the oil. 1 K14000150 • Remove the filler cap from the oil tank. • Remove the oil drain plug from the frame (1). • Fully drain the oil. – Place the motorcycle on the auxiliary stand, BMW No. 00 1 620 . • Remove the oil drain plug from the engine and fully drain the oil from the engine. 00.32