e Attention: Do not use synthetic oils. X Tightening torque: Oil drain plug, engine ................................... 40 Nm Oil drain plug, frame oil tank......................... 21 Nm Oil line to frame............................................ 42 Nm Oil strainer to frame...................................... 80 Nm Oil tank cover to frame ................................... 5 Nm Right and left covers to main frame................ 2 Nm Right and left covers to air duct ..................... 3 Nm Right and left covers to cover, front ............... 1 Nm Right and left turn indicators to fairing bracket...........................................................
3 Nm Cover, rear, to right and left covers and stowage-compartment frame ......................... 2 Nm Stowage-compartment rail to stowage-compart- ment frame..................................................... 9 Nm Release lever to release shaft....................... 10 Nm Operating fluids: Brand-name HD oil, API classification SF, SG or SH; suffix letters CD or CE are permitted; alternatively, brand-name HD oil of CCMC classification G4 or G5; suffix PD2 is permitted. Capacities, engine and oil tank: with filter replacement ......................................2.5 l .............................(4.40 Imp. pints/2.64 US quarts) X Tightening torque:
Oil drain plug, engine ................................... 40 Nm Drain plug, frame oil tank.............................. 21 Nm Cleaning oil strainer in frame Greasing rubber grommets for cover insert (Inspection II, once only) – Drain engine oil ( a 00.32). – Remove left cover ( a 46.6). (Inspections I, II, III and IV) – Remove cover inserts. 1 6 2 4 3 K14000380 5 K14000350 • Remove oil-tank cover (1). • Disengage clutch cable (arrow). • Remove release lever (3). • Disconnect oil line (4). • Remove oil strainer (2) and clean it with com- pressed air. • Installation is the reverse of the removal proce- dure: pay particular attention to the following.
• Always install new seals for the oil line and oil strainer. • Adjust clutch play ( a 00.45). • Coat pin (5) and hook (6) with rubber care prod- uct . • Install cover insert. 00.34