Exposing cylinder head 1 4 3 2 5 6 E110410 K14000050 L Note: TDC position: Marks on the timing-chain sprockets (arrows) must be parallel with the cylinder head, the bores in the timing-chain sprockets are at the top. • Remove fasteners securing bracket (1) of ignition coil, pull bracket complete with ignition coil (2) forward and lay it down. • Remove rubber cap (arrow). • Release knurled nut (3). • Disengage throttle cable from adapter. • Use pliers, BMW No. 17 5 500 , to release hose clip (5) and disconnect cylinder-head breather hose (6). • Remove spark plug. L Note: Note the position of the two anchorages for ignition coil (1) on the cylinder-head cover.
• Use an Allen key to turn the crankshaft clockwise to the TDC position. • Remove 8 fasteners (4) and remove the cylinder- head cover with gasket. Turning crankshaft to TDC position • Remove the central threaded plug in the magnet housing. 00.39