21 00 004 Checking clutch play, adjust- ing if necessary Checking brake pads and discs for wear, replacing if necessary (Inspections I, II and III) (Inspections II and III) A Checking brake pads for wear Brake pads, front brake 1 E000240 • Release lever (1) on the gearbox must be located on the splines such that when it is pressed for- ward as far as the release point, distance “A” is as specified. K14000210 Distance “A” ......... 47...52 mm (1.8504...2.0473 in) • Visually inspect the brake pads. – Replace the brake pads if wear marks (arrows) are no longer clearly visible.
2 Brake pads, rear brake 3 B K14000200 • Adjust distance “B” by turning adjusting screw (2) on the clutch handlebar lever. • Lock adjusting screw (2) with knurled nut (3). K14000220 • Visually inspect the brake pads. – Replace the brake pads if wear marks (arrows) are no longer clearly visible. Distance “B”........ 1.0...2.0 mm (0.0394...0.0787 in) X Tightening torque: Release lever to release shaft....................... 10 Nm 00.45