Final inspection with road safety and functional check (Inspections I, II, III and IV) Road safety check • Check wheels and tyres. • Check tyre pressures and correct if necessary. Tyre tread depth (recommended minimum value) d Warning: Thread depth must comply with legal regulations concerning minimum tyre tread depth. Front wheel .................................. 2 mm (0.0787 in) Rear wheel ................................... 3 mm (0.1181 in) Tyre pressures (tyres cold) One-up Front wheel ............................. 2.2 bar (31.306 psi) Rear wheel ............................. 2.5 bar (35.575 psi) With full load Front wheel .............................
2.2 bar (31.306 psi) Rear wheel ............................. 2.5 bar (35.575 psi) Roadworthiness check – Clutch, gear shift – Steering – Handbrake and footbrake – Lights and signalling equipment, telltale and warning lights, instruments – Side-stand switch – If necessary, test ride 00.62