11 00 050 Removing engine 11 • Secure adapter, BMW No. 11 0 591 , to the plate for the engine lifter. • Place engine lifter, BMW No. 00 1 540 , under engine. 12 1 K14110090 • Disengage fuse box (12). • Remove fasteners securing intake stub (11) to cylinder head. • Disconnect integrated ignition coil from spark plug. • Remove the left-hand coolant hose. • Remove fasteners for engine shell and remove engine shell with voltage regulator. 2 24 cm E110040 • Secure the engine lifter by installing stud bolt (1) through bottom bore in engine block and secur- ing stud (2) in top bore in engine block. • Remove screws securing cylinder head to frame on left and right. Use pin wrench, BMW No.
11 6 661 , to slacken the lock- nuts and back off the adjusting sleeves. • Working carefully, slightly lower the engine, tak- ing care not to damage the radiator. • Disconnect the crankcase breather. • Lower the engine all the way. • Turn the engine toward the left and push it clear of the motorcycle. L Note: When locating pin, BMW No. 11 0 661 , is inserted and the floating bearing stud is pulled out 24 cm (9.45 in), the rear swinging arm remains in place in the frame, but the engine is free. • Slacken nut of swinging-arm bearing. • Insert locating pin, BMW No. 11 0 661 , to force swinging-arm stud out of frame and pull the stud 24 cm (9.45 in) out of the frame.
• Remove bottom rear engine mount fastener. • Remove the gear shift pedal. 11.24