Objectives 652 Body Electrical Diagnosis • Describe the proper verification of the repair by: – Confirming the problem has been eliminated and that no new problems have been created by the repair – Locating information regarding what initializations need to be performed following the repair – Verifying all necessary initializations have been performed determine if a system is controlled by an ECU or if it is purely an electrical circuit and to observe and verify ECU inputs and outputs using Techstream Data List and Active Test. 6. Given a Techstream Unit with TIS access and a vehicle, the technician will be able to 7.
Introduction to the Oscilloscope (Optional – Instructor discretion based upon target audience skill level and time): Given a Techstream Unit, an oscilloscope, and a signal generator, the technician will be able to properly set-up and apply the basic features of an oscilloscope in combination with Techstream. f Technical Training