Brother MFC-9660 Multi-function Printer User & Service Manual PDF (EN)

MFC-9660 OWNER’S MANUAL

Стр. 1

THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. APPROVAL INFORMATION Use only GENUINE brother supplies DO NOT refill the toner cartridges. Attempting to use refilled toner cartridges or the use of incompatible toners, may cause damage to your product. Any such damages will not be covered by warranty. Warranty coverage does not apply to problems caused by the use of 3rd party consumables.

We can only recommend the use of genuine Brother consumables.

Стр. 2

Using This Manual Thank you for purchasing a Brother machine. This machine has been designed to be simple to use, with LCD screen prompts to guide you through functions. However, you can use the machine to its fullest potential by taking a few minutes to read this manual. Additionally, the machine has a Reports key. Press Reports and 1 to print a help list of basic operational steps and functions. All chapter headings and subheadings are listed in the Table of Contents. You will also be able to find information about a specific feature or function by checking the Index at the back of this manual.

Also, throughout this manual, you will see special symbols alerting you to important information, cross-references, and warnings. Illustrations of some screen displays also help you choose the correct key-presses. Finding Information Symbols Used In This Manual Note or additional information. The machine may be damaged or may not work correctly if this is not observed. Warnings detail precautions you must take to avoid possible personal injury. i

Стр. 3

User-Friendly Programming We have designed the machine with on-screen programming. User-friendly programming helps you take full advantage of all the functions the machine has to offer. Since your programming is done on the LCD, we have created step-by-step on-screen prompts to help you program the machine. All you need to do is to follow the prompts as they guide you through the function menu selections, programming options and settings. Additionally, you can program settings more quickly by pressing Menu and the menu number using the dial pad. For complete list of the function selections, options, and settings, see Menu Selection Table , page 9. ii

Стр. 4