Toner Save You can conserve toner using this feature. When you set Toner Save to ON , print appears somewhat lighter. The default setting is OFF . 1 Press Menu , 1 , 4 . 2 Press or to select ON (or OFF ). 3 Press Set . 4 Press Stop/Exit . Power Save Setting Power Save Mode more reduces power consumption by turning off the CPU inside the machine. If Power Save Mode is switched ON , when the machine is idle, it drops into power save mode automatically. In the Power Save Mode, you cannot use fax detect function or remote activation. The machine will not display the date and time in this condition. 1 Press Menu , 1 , 5 . 2 Press or to select ON (or OFF ).
3 Press Set when the screen displays your selection. 4 Press Stop/Exit . Sleep Mode Setting the Sleep Mode reduces power consumption by turning off the fuser inside the machine, while the machine is idle. You can choose how long the machine is idle (from 00 to 99 minutes) before it drops into sleep mode. The timer automatically resets when the machine receives a Fax or PC data, or makes a copy. The factory setting is 05 minutes. While the machine is in sleep mode, you will see SLEEP in the LCD. When you try to print or copy in sleep mode, there will be a short delay whilst the fuser warms up to working temperature. 1 Press Menu , 1 , 6 .
2 Use the dial pad to enter the amount of time the machine is idle before it drops into sleep mode (00 to 99). 3 Press Set . 4 Press Stop/Exit . Setting the Dialling Mode (Tone/Pulse) The machine is initially set to TONE . If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below. 1 Press Menu , 1 , 7 . The screen prompts you to select PULSE (or TONE ). 2 Use or to select the dialling mode. 3 Press Set when the screen displays the dialling mode you want. 4 Press Stop/Exit . 15 Chapter 1