Quick Reference Guide For Thai, Arabic, Indonesian, Cantonese, please refer to Quick Reference Guide enclosed in the carton box. Sending Faxes Real Time Transmission You can send faxes in real time. Automatic Transmission 1 Place the original face down in the Automatic Document Feeder. 2 Press Menu, 2, 2, 5 . 1 Place the original face down in the Automatic Document Feeder. 2 Enter the fax number using One Touch, Speed Dial, Search or the dial pad. 3 Press or to select ON , and then press Set OR 3 Press Fax Start . For the next transmission only press or Sending a Cover Page 1 Place the original face down in the Automatic Document Feeder. 2 Press Menu, 2, 2, 7 .
3 When NEXT FAX ONLY appears, press Set . to select NEXT FAX ONLY , and then press Set . 4 For the next fax only, press or to select ON , and then press Set . 5 Press 1 to select additional settings OR —Press 2 if you are ready to fax. 6 Enter the fax number. 7 Press Fax Start . 4 Press or to select ON (or OFF ), and then press Set . 5 Press or to select a comment and then press Set . 6 Enter two digits to indicate the number of pages being sent, and then press Set . 7 Press 1 to select additional settings OR —Press 2 if you are ready to fax. 8 Enter the fax number. 9 Press Fax Start . Receiving Faxes Select Receive Mode There are four different receive modes:
FAX/TEL , TAD , MANUAL and FAX . Press Mode repeatedly until the FAX and FAX/TEL (F/T) light shows your selection. To select FAX/TEL or MANUAL as your receive mode, you will need to connect an external telephone. (Make sure you set Ring Delay and F/T Ring Time when the FAX/TEL is selected.) iii