Top cover 1 Remove the following assemblies: Toner cartridge, media tray, and cable pod. See “Toner cartridge” on page 15 through “Cable pod” on page 17 Left side, back, and right side covers. See “Left side cover” on page 18 through “Right side cover” on page 24. 2 Open the toner cartridge door. 3 Loosen, but do not remove, the two screws (callout 1) on the back of the printer. 4 Remove the two screws (callout 2) on the top of the printer. 5 Lift the cover off of the printer. 2 21 2 Figure 18. Remove the top cover Q1342-90910 External assemblies 29