Laser/scanner assembly 1 Remove the following assemblies: Toner cartridge, media tray, and cable pod. See “Toner cartridge” on page 15 through “Cable pod” on page 17. Left side, back, right side, and top covers. See “Left side cover” on page 18 through “Top cover” on page 29. CAUTION Never operate the printer with the laser/scanner assembly exposed. The reflected beam, although invisible, can damage your eyes. When servicing the printer, replace the top cover before operating the printer. 2 Disconnect the ribbon cable from its socket (callout 1) on the laser/scanner.
3 Disconnect the wire harness cable connector (callout 2) from the connector assembly and unlace the harness from the cable lance. 1 1 2 Figure 29. Disconnect the laser/scanner harnessing 40 Chapter 2 - Removal and replacement Q1342-90910