4 Release the two shutter-retaining tabs (callout 3) and remove the shutter and shutter spring. CAUTION Use care when releasing the shutter-retaining tabs. The tabs are plastic and can be broken. Only bend the tabs enough to release the shutter lever. 5 Remove the four screws (callout 4) that fasten the scanner to the printer chassis and remove the laser/scanner. 4 3 3 Figure 30. Remove the laser/scanner CAUTION When replacing the laser/scanner, verify that it is fully seated on the printer chassis. The laser/scanner can be damaged when the mounting screws are tightened if it is not fully seated.
Hint Insert the spring into the hole on the laser/scanner before you snap the shutter lever back into place. Q1342-90910 Internal assemblies 41