Fuser assembly 1 Remove the following assemblies: Toner cartridge, media tray, and cable pod. See “Toner cartridge” on page 15 through “Cable pod” on page 17. Left side, back, right side, and top covers. See “Left side cover” on page 18 through “Top cover” on page 29. 2 Remove two screws (callout 1) from the right fuser bracket. 3 Remove a third screw (callout 2) from behind the large gear on the right fuser plate. Rotate the gear counter clockwise to align a hole in the gear with the screw-head. 4 Remove the bracket. 2 1 2 2 Figure 31. Remove the right fuser bracket 42 Chapter 2 - Removal and replacement Q1342-90910