Control panel menus Touch MENU on the touch-screen graphical display to cycle through the control panel menus. Each menu is described in a separate table in this section. Menu items appear only if their associated option is installed, or if their functions are activated. All menus and their associated items are available when the MFP is online. In menu mode, if no item is touched for approximately 60 seconds, the system automatically returns to the top level and either an existing error or one of the following is displayed: READY , if the MFP was online OFFLINE , if the MFP was offline Menu map From the control panel, you can print a menu map that shows the current MFP configuration.
Additional menu items can appear in the control panel, depending on the options currently installed in the MFP. The following is a list of menus available from the control panel, and where to find information about each. Retrieve job menu (page 47) Information menu (page 47) Paper handling menu (page 47) Configure device menu (page 49) Diagnostics menu (page 51) Service menu (page 51) Using a menu map To see the current settings for the menus and items available in the control panel, select or print a menu map. Select an item from the menu map 1 Touch MENU on the touch screen. 2 Touch the required menu. 3 Touch or to scroll to the page you want, and then touch the required item.
Print a menu map 1 Touch MENU on the touch screen. 2 Touch INFORMATION MENU . 3 Touch PRINT MENU MAP . A current menu map prints. Values that appear with a bullet ( ) next to them are the currently selected values for a setting. Many of these values can be overridden from the print driver or a user program. You might want to store the menu map near the MFP for reference. The contents of the menu map vary, depending on the optional accessories installed in the MFP. For a complete list of accessories or to change a control panel item and its values, see the following tables. 46 Chapter 3 Product configuration C8523-90921