Retrieve job menu This menu contains stored-job information. Table 9. Retrieve job menu Information menu This menu contains MFP information pages that give details about the MFP and its configuration. Table 10. Information menu Paper handling menu When paper-handling settings are correctly configured through the control panel, you can print by choosing the type and size of paper from the print driver or software application. Some items in this menu can be set from a software application or from the print driver (if the appropriate driver is installed). Print-driver and software-application settings override control-panel settings. Table 11.
Paper handling menu default settings C8523-90921 Control panel menus 47 Item Explanation NO STORED JOBS This menu is displayed when there are no stored print jobs. [NAME OF CURRENT JOB] This menu shows a list of currently stored print jobs. Item Explanation PRINT MENU MAP The menu map shows the layout and current settings of the control panel menu item. PRINT CONFIGURATION The configuration page shows the current MFP configuration. If an HP Jetdirect print server card is installed, a Jetdirect configuration page will print as well. See “Configuration page” in chapter 7.
PRINT SUPPLIES STATUS PAGE The supplies status page shows the number of pages remaining for the print cartridge and maintenance kit. Percentage of toner remaining as well as number of pages remaining for all consumables are shown on this page. PRINT USAGE PAGE The usage page contains information that can be used for cost analysis and accounting. PRINT FILE DIRECTORY The file directory shows information for all installed mass-storage devices. See “File directory page” in chapter 7. PRINT PCL FONT LIST The PCL font list shows all of the PCL fonts currently available on the MFP. PRINT PS FONT LIST The PS font list shows all of the PS fonts currently available on the MFP.
Item Values Explanation TRAY 1 MODE= FIRST FIRST If TRAY 1 MODE=FIRST and paper is loaded in tray 1, the MFP will pull paper from tray 1 first. TRAY 1 SIZE= LETTER LETTER Set the value to correspond with the paper size currently loaded in tray 1. Note This item is only displayed if TRAY 1 MODE is set to cassette.