Chapter 6: Advanced Chassis Setup Installing the Adapter Card Place the adapter card and spacer plate in the motherboard drawer, 1. aligning the holes in the spacer and the adapter card with the holes in the motherboard drawer. Secure the adapter card and spacer plate to the motherboard drawer, using 2. the fi ve screws which were previously set aside. Reconnect the wiring from the motherboard to the adapter card. 3. Return the motherboard drawer to the closed position in the chassis. 4. Add-on Card/Expansion Slot Setup The SC827 chassis includes I/O slots for add-on cards and expansion cards.
Each side supports one low profi le/half length add-on card for a total of four per chassis, one per drawer. Figure 6-13: I/O Shield Placement PCI Slot Shield Add-on Card Slot Clip 6-13