A+ SERVER 2021TM-BTRF/BIBXRF User's Manual Installing Add-on Cards Disconnect the power supply, lay the chassis on a fl at surface, and open the 1. chassis cover. Pull open the add-on card slot clip in the rear of the chassis. 2. Slide the temporary PCI slot shield toward the slot clip and remove the 3. temporary shield from the chassis. Connect the add-on card to the riser card. 4. Secure the riser card to the motherboard tray using the riser card screw. 5. Slide the add-on card bracket into the rear add-on card slot and secure with 6. the add-on card bracket screws. Close the add-on card slot clip. 7. Note:
Under normal circumstances, the riser card and add-on card bracket are not separated. Figure 6-14: Installing the Low Profi le Add-On Card PCI Slot Shield Add-on Card Add-on Card Bracket Riser Card Screw Riser Card Add-on Card Bracket Screws 6-14