Loading Continuous Paper Once your tractor is installed, you can load continuous paper. See that the printer is turned off and open the front lid. Then move the print head to the center of the printer. Pu11 the paper bail away from the platen (the black roller) just as you did for single sheet loading. (Look at Figure 1- 7 if you need to check on the names of any of these parts.) Using Figure 1-13 as your guide, pu11 the locking levers forward so that you can move the pin feed holders to the left and right. Put the left holder approximately 3 I 4 of an inch from the extreme left position and then push the locking lever back to lock that holder in place. Leave the other holder unlocked.
Figure 1-13 . Pin feed holder adjustment Open the pin feed covers as shown in Figure 1-14 and feed the paper under the paper separator and into the paper slot; push the paper through until it comes up between the ribbon guide and the platen. 14