5-1-2 Installation to Screen This IAG is intended to be used as the following: When the button for NXR- ILM Unit, which is displayed by the IAG EtherNet_IP_Network Monitor or DLR_Monitor located on the screen, is pressed, the currently displayed screen switches to the screen with this IAG and the IAG accesses to the Unit to receive the necessary information to display. Pressing the Return button placed in the page containing this IAG works as the trigger to back to the originally displayed screen. Note: The simplest screen design, a single page is linked with a single destination page, is described in this section. Switches to the page where the IAG EtherNet_IP_NetworkMonior is placed.
■Related Screen (previous screen 1) ■Screen with IAG Return SelectDeviceIPAddress CurrentPageName SelectDeviceIPAddress PreviousPageName ■Related Screen (previous screen 2 ） When the NXR- ILM Unit is selected and its button is pressed in the EtherNet_IP_NetworkMonitor IAG or the DLR_Monitor IAG, the screen switches to the page where this IAG is placed. SelectDeviceIPAddress CurrentPageName Non-retentive variable area SelectDeviceIPAddress PreviousPageName When the NXR- ILM Unit is selected and its button is pressed in the EtherNet_IP_NetworkMonitor IAG or the DLR_Monitor IAG, the selected IP address information and the originally displayed screen name are acquired. 19