For this screen design, implement the settings described below. Events and Actions Settings for Previous Screen Set the action ShowPage for the event SelectILMMaster of the IAGs, EtherNet_IP_NetworkMonitor and DLR_Monitor . Then enter the page name in which this IAG is placed. IAG Property Assignment (Previous Screen) Assign the same variable to the following properties (Input/Output) for EtherNet_IP_NetworkMonitor and DLR_Monitor. Property Assignment (IAG) Assign the variables to the following properties. Now the IP address information and the destination page are shared among screens. Screen Settings Place the Return button on the page containing this IAG.
Then set the action ShowPage for the button event Release . Next, enter the name of the previous page in which the IAG EtherNet_IP_NetworkMonitor is placed. Additional Information The type of button is not specified. 20 Event Description SelectILMMaster Executed when the IO-Link master unit is selected. Enter the name of the page where this IAG is placed.
Property (Input/Output) Description Variable Variable Data Type SelectDeviceIPAddress IP address of the device to be displayed SelectDeviceAddress String CurrentPageName Page name of this IAG PreviousPageName String Property (Input/Output) Description Variable Variable Data Type SelectDeviceIPAddress IP address of the device to be displayed SelectDeviceAddress String PreviousPageName Name of the page displayed after this page is closed PreviousPageName String Enter the name of the page where the IAG EtherNet IP Network i_ pla_ Monitor s ced.