Screen Specifications 29 DC Power Status Screen Displays input/output power supply voltage of the IO-Link master unit. Logs input/output power supply voltage per sampling cycle 1 2 3 4 5 11 12 11 12 6 6 7 7 8 8 9 9 10 10 13 14 15 16 17 18 19 20 No. Part Description 1 DataDisplay IP address of the selected device is displayed. 2 Group Units’ information is shown. Refer to No. 15 and later for details. 3 Button The LED that indicates the location of the IO-Link master unit on the screen is lit when this button is pressed. It is for expansion and not shown in the actual NA. 4 Group Displays current input/output power supply voltage.
When power voltage excesses to the upper or lower limit of thresholds, DataDisplay and the arrow turn red. 5 Image Pressing the pin graphic displays the Pin Layout window. 6 Button Pressing the Start Logging button begins logging power voltage. When power voltage excesses to the upper or lower limit of thresholds, results are stored to IO variables, Log□PowerVoltage and Log□PowerVoltageTime. Pressing the Stop Logging button stops logging, but results are not stored. 7 Lamp Displays the progress of logging by any of the following:
Logging, Logging paused/Results found, Logging paused/No results, or Abnormal logging termination/No results 8 Button It is for expansion and not shown in the actual NA. 9 Button Clears the value of the array variable in which logs are stored to zero. 10 Button Save logging results to a file. It is for expansion and not shown in the actual NA. 11 DateTime Displays the logging times. 12 DataDisplay Displays power voltage per sampling cycle. 13 DropDown Select and display a sampling cycle for logging. Options: 1, 10, and 60 (s). Default is 1 s. 4 5 11 12 6 7 8 9 10 11 12 6 7 8 9 10 15 16 17 18 19 20