30 14 DataEdit Displays upper and lower voltage limits. Default upper limit: 26.4 VDC, Default lower limit : 20.4 VDC (Rated voltage range) Note: Upper and lower limits must be set within the rated voltages 15 Lamp Unit status is displayed. 16 Lamp Network condition is displayed. 17 Lamp Displays EtherNet1 port condition. 18 Lamp Displays EtherNet2 port condition. 19 Lamp Displays the condition of the input power supply voltage. 20 Lamp Displays the condition of the output power supply voltage. Pin Layout Window ・ Displays the input/output power supply pin layout of the IO-Link master unit. 1 No. Part Description 1 Button Closes this window. 1