5-2-2 Installation to Screen ⚫ Property Assignment This IAG uses the safety configuration information which has been read out by ReadConfiguration. Be sure to place ReadConfiguration IAG in the first displayed screen. Assign variables to the following properties (input/output) to share the safety configuration information. Allocate array variables which have been set to retentive to the following properties (Input/Output) in order to save each safety CPU unit safety signature data to NA.
22 Property (Input) Description Data Type FinishReadConfigration Completion flag for configuration reading Property (Input/Output) Description Data Type ControllerName Controller name of connected unit CheckController Check flag for unit connected with the safety CPU unit. SafetyCPUPosition Place to where the safety CPU unit is connected. SelectUnitNo The unit number of the selected unit. SignatureCompError Flag that shows safety signatures mismatching SignatureCompError RestoreFile _ Display of comparison with a safety signature of a restored file.
CompRestoreFile Flag to compare restored files Property (Input) Description Data Type SignatureSetting Flag for the registered signature which stored in NA. Boolean(15) NA Signature _ Signature information which stored in NA. String(15) NA LastModffied UTC _ _ UTC of the registered signature which stored in NA. String(15) NA LastModffied _ Registration time of the registered signature which stored in NA. String(15)