■Related Screen (First Displayed Screen) ■Screen with IAG When the screen with the configuration reading IAG is first displayed, it reads out configuration information of the controller that connected with NA. Then the information is written in the following variables. The current safety signature information is saved to these variables after registration.
After registration, safety signature will be always read out and checked against the registered information when this screen NA Registered Device Information FinishReadConfigration ControllerName(0-15) CheckController(0-15) SignatureSetting(0-15) NA_Signature(0-15) SafetyCPUPosition(0-15) NA_LastModffied_UTC (0-15) SelectUnitNo SignatureCompError(0-15) NA_LastModffied (0-15) SignatureCompError_RestoreFile Retentive Variable Area CompRestoreFile Non-retentive Variable Area Precautions for Correct Use Sysmac Studio Device Reference in registered order. ・ If 16 and more devices are connected, only 16 can be assigned.
・ When multiple internal/ external devices are registered in a PJ file, they are allocated to 23