Controller_Sysmac_Studio_Selection_Guide_EN_202005_PC-388 (EN)

Sysmac Studio Selection Guide One Integrated Development Environment Created to give you complete control over your automation system Combining configuration, programming and monitoring in a single interface, Sysmac Studio is a unique environment that integrates logic, motion and drives, robotics, safety, visualization, sensing and information technologies in one project. This reduces the learning curve and the intra-operative software costs. License options include the full-featured version, the controller-specific version, and a version specific to other technologies. One license to cover 90% of all application needs 90% Omron offers a simple process to purchase a Sysmac Studio license.

In most cases, one license can cover all your application needs, with only a one-time fee and no maintenance contracts. 2

Стр. 2

License Options 3 Sysmac Studio Standard Sysmac Studio Lite Sysmac Studio Vision Sysmac Studio Measurement Symac Studio Drive Sysmac Studio Safety Sysmac Studio NX Logic NX1P2 • • NX102 • • NJ1 • • NJ3 • NJ5 • NX7 • HMI NA5 • • I/O NX I/O EtherCAT Coupler • • NX I/O EtherNet/IP Coupler • • • Vision FH • • • FHV7 • • • FQM • • • Safety NX-SL3 • • • • NX-SL5/CSG • • • Motion 1S • • • G5 • • • Measurement ZW • • •

Стр. 3

Sysmac Studio Selection Guide Sysmac Studio Standard and Lite Editions One Integrated Development Environment Sysmac Studio Standard Edition Compatible with all Sysmac Devices Included with Install: Sysmac Studio CX-Integrator CX-Designer CX-Protocol Network Configurator CX-ConfiguratorFDT Adept Robot IP Address Setting Tool CX-Server Communications Middleware Sysmac Studio Lite Edition Compatible with all Sysmac Devices except NJ3, NJ5, NX7 Included with Install: Full Capability of Sysmac Studio Limited to NX1, NJ1 controllers for cost savings.

Sysmac Studio CX-Integrator CX-Designer CX-Protocol Network Configurator CX-ConfiguratorFDT Adept Robot IP Address Setting Tool CX-Server License required to upgrade from Lite to Standard 4 Part Number # of Users License Delivery Method SYSMAC-SE201L 1 Electronic SYSMAC-SE203L 3 Electronic SYSMAC-SE210L 10 Electronic SYSMAC-SE230L 30 Electronic SYSMAC-SE250L 50 Electronic SYSMAC-SE2XXL Site Electronic Part Number # of Users License Delivery Method SYSMAC-LE201L 1 Electronic SYSMAC-LE203L 3 Electronic SYSMAC-LE210L 10 Electronic Part Number # of Users License Delivery Method SYSMAC-LU501L 1 Electronic SYSMAC-LU503L 3 Electronic SYSMAC-LU510L 10 Electronic

Стр. 4

System Requirements The system requirements for Sysmac Studio Standard and Sysmac Studio Lite are given in the following tables 1. If you create a user program with a memory size that exceeds 20 MB, use the 64-bit edition of the operating system and 8 GB or more of RAM. 2. If the user program is large, we recommend that you use a 64-bit IBM AT or compatible with an Intel® Core™ i7 processor or better and 8 GB or more of RAM. 3. If you use the Robot Additional Option and execute Vision and Robot integrated simulations, use a 64-bit IBM AT or compatible with an Intel® Core™ i5 processor or better and 8 GB or more of RAM.

In addition, the following are also required 5 OS CPU RAM Display Windows 7 (32-bit) Windows 8 (32-bit) Windows 8.1 (32-bit) Windows 10 (32-bit or 64-bit edition) Minimum¹ IBM AT or compatible with Intel® Celeron® processor 540 (1.8 Ghz) 2 GB XGA 1,024 x 768, 16 million colors Recommended²,³ IBM AT or compatible with Intel® Core™ i5 M520 processor (2.4 GHz) or equivalent 4 GB min. WXGA 1,280 x 800x 16 million colors System Requirement Specification Available hard disk space required for installation 4.6 GB min. Communications port Ethernet or USB (USB 2.0) Recommended Video Cards The following are recommended to use 3D motion monitoring Video memory 512 MB min.

Video Card One of the following video cards: • NVIDIA GeForce 200 Series or better • ATI Radeon HD5000 Series or better

Стр. 5