Atari Games Cops — Cops TM-398 1st Printing COLOR COVERS_Page_2.jpg

CHAPTER 1 — SET-UP “ Cops OPERATOR’S MANUAL Operating the Game Characteristic Specification To operate your game for maximum income, you should regularly use the self-test to check the electron- Input Current 3 Amps at 120 V Line Fuse Rating 4 Amps at 250 V, slow blow ics, controls and sound. By using the self-test regularly, Line Voltage 102 to 132 VAC Temperature 37° to 100° F (5° to 38° C) Humidity Not to exceed 95% relative Installation Width* 44 inches (111.8 cm) Depth* 86 inches (218.4 cm) This game is designed for indoor use only. The game must NOT be installed outdoors or under the following conditions: Height* 80 inches (203.2 cm) Weight* 650 Ibs.

(295 kg) you can find and fix problems immediately. This lets you keep your game in top condition. ¢ In areas directly exposed to sunlight, high humidity, direct water contact, dust, high heat or extreme cold. * In locations that would present an obstacle in the * © * Game Specifications case of an emergency, i.e., near fire equipment or emergency exits. On an unstable surface or subject to floor or other When transporting or moving the machine, retract the vibration YintamOn, d adjustapie fictahle feet feet fram from th e tne floor moor co So that that the ioh tne weignt or Ftha tne machine rests on the casters.

When the cabinet is in its new playing position, the feet should be re-adjusted to secure the machine in Do not subject the game to excess physical shock when transporting or moving it. Do not transport the game with a laser disc or CD-ROM loaded in the player. When cleaning the monitor CRT face Gwhich should be done at regular intervals), use a soft cloth and glass The cabinet must be grounded with a securely connected grounded plug. benzene. Be sure to switch the power OFF before replacing any parts or connecting/disconnecting the electrical connectors. ¢ Table 1-1 The Cops game has 7 casters and 8 adjustable feet.

To secure the machine in place, all feet must be lowered (unscrewed) so that the casters are at least 0.2-inch above the floor. Special Precautions * *Unboxed DO NOT attempt to repair the printed-circuit boards (PCB) yourself. This will void the warranty. The PCBs contain sensitive components that could place. cleaner. Do not apply solvents such as thinners or Special Disassembly Because of the unusual size of the Cops game, it may be necessary to disassemble the game into two sections so that it can pass through entrances of less than 44”. To do so, unbolt the roll bars. Then, in the coin box, easily be damaged by the small internal voltage of a multi-meter.

Always return the faulty PCB to your distributor for repair. use a 7/16” wrench inserted through the openings at * When unplugging the game from the electrical outlet, grasp the plug, NOT the cable. nect the harness interconnects. * Do not use any fuse that does not meet the specified rating. * Make complete connections to all the PCBs and other parts of the circuit. Insufficient insertion of ICs and connectors will lead to unreliability and possi- could damage the players internally. The operating (ambient) temperature range is from 5° C to 35°C. 1-2 CAUTION Do not disassemble or tip the game with the CD-ROM or laser disc installed. You ble damage to the machine. e the edges of the box.

Here you will have access to the connections to the central connecting plate that holds the main unit and the seat assembly together. Discon- Reassemble in the reverse order.